heart sublimation slate


Our heart photo rock slate is a 1/4″ thick and approximately , with a white coating that is ready to sublimate. Each piece is handcrafted and chiseled with imperfect edges to make each slate unique. Memorialize a loved one or use your favorite inspirational quote. The Rock Slate comes with two black plastic stands to display on any desk or mantle. Please be aware that these are natural stone and slight imperfections in the surface may occur


Heat press settings:
– temperature – 400 degrees F
– dwell time – 5:00 to 5:30
– pressure – light to medium

– The recommended settings above may need adjustments for best results.
Settings will vary depending on the heat press brand and model ink and paper
and atmospheric conditions.
– Clamshell type presses may not be ideal for sublimating items more than 1/4
inch thick. Presses that can deliver pressure from directly above the
substrate are recommended.
– To add color to the rough edges of the stone increase the bleed edge by 3/4
of an inch and wrap the transfer around the substrate on all 4 sides. Secure
with heat tape.
– Make sure that the sublistones are at room temperature before sublimating.
The temperature of the stone prior to sublimating will greatly influence the
dwell time necessary for best results.

Layer the press from the bottom pad to the top heat platen as follows:
1. teflon sheet or scratch paper
2. green heat conductive pad
3. transfer – face up
4. sublistone – face down
5. teflon sheet or scratch paper

29 in stock